can i use the p10 display upright

The Dot Matrix Display (DMD) is a 32x16 array of high-brightness LEDs for visually striking effects. [Product Page]
Post Reply
aydonad
Posts: 1
Joined: Wed Jun 03, 2020 11:00 am

can i use the p10 display upright

Post by aydonad » Wed Jun 03, 2020 11:15 am

Hello

İ need some helps for p10 display. I want to use it upright. normally 32 * 16 but I want to use 16 * 32

İ think i should make changes in the library. Is there anyone who can help?

Image

Brissieboy
Posts: 209
Joined: Fri Sep 20, 2013 7:25 am

Re: can i use the p10 display upright

Post by Brissieboy » Wed Jun 03, 2020 10:30 pm

What you are after would require a lot of changes to either of the DMD libraries (DMD or DMD2) if you want all the library features. You did not say which library you would like to use.
If you just had a limited number of static displays you could possibly use this approach.
There are other threads in the 'Dot Matrix Display' area which may also help you. This one gives some details on how the DMD and fonts work.
I have used the original DMD library in the past and modified it quite a bit to suit my particular needs for particular projects so may be able to provide some assistance there.
Another approach might be to use 2 DMD displays to achieve a 32x32 array. Others have done that with more details available on this forum.

Post Reply