128x128 pixel 1.5" full colour OLED display with MicroSD card slot. [Product page
- Joined:Thu Dec 01, 2016 5:03 pm
Can't boot after install fbtft!
I bought the 128×128 OLED screen from you, and I want to use with Raspbian on Pi 3 B model, like here, http://www.freetronics.com.au/pages/ole ... EBWZvkrL1d
I just start to try the setup, but after the first step,
Code: Select all
sudo wget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update -O /usr/bin/rpi-update
sudo chmod +x /usr/bin/rpi-update
sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update
The Pi can’t boot anymore, after the logo everithing was black :/
Can anyone help me?
Thank you very much!
- Joined:Wed Jan 17, 2018 5:08 am
I have the same issue
Can someone please help?
I didn't wire up the oled128 with the pi yet. Just using my usual HDMI display. Does that matter?
- Joined:Tue Sep 09, 2014 2:16 am
Yeah I think something happened around the Stretch edition of Raspbian. I'm slowly working out what the changes are, but one thing I've done is disable the HDMI and Audio via the /boot/config.txt file (as well as enabling SPI via that) which seems to improve things.
Still haven't worked out why the fbtft_device module won't auto load, but I've got it happening manually so that's something.