Page 1 of 1

Raspberry Pi Board Suggestions

Posted: Mon Feb 03, 2014 11:11 pm
by angusgr
Hi everyone,

We have a few Raspberry Pi boards in the pipeline that I'll be pretty excited to see announced over the next few weeks.

However, we're still curious... what Pi expansions would you like to see? What would scratch your project's itch?

- Angus

Re: Raspberry Pi Board Suggestions

Posted: Tue Feb 04, 2014 9:01 am
by MrHobbyelectronics
Hi guys,
I would love to see a 3-axis accelerometer module for the Pi, similar to the one that you supply for Arduino.

Nick.

Re: Raspberry Pi Board Suggestions

Posted: Tue Mar 04, 2014 11:27 am
by murray78
How about adding the RTC module to the breakout board, the DS3232 is compatible with the raspberry pi.

Re: Raspberry Pi Board Suggestions

Posted: Sat May 23, 2015 12:40 am
by he1957
HI Folks,

What would be nice is a version of the "PiBreak Plus Raspberry Pi Prototyping Board" which includes a DC input power socket (and screw terminals) pre-fitted with a wide range DC switching regulator over the input range of about ~5.0 to 15 VDC that provides the 3.3 and 5.0 VDC rails to the Pi board and the input voltage as a pass-through.

Optionally:

1. Space or pads for a couple of DIP chips with pin breakouts
2. Pads for DIP chip or other interconnects ie: a few sets of two pads connected to allow junctions (refer Jaycar HP9556 for ideas).
3. D/A and/or A/D chip mount with breakouts
4. Double length pin header(s) to allow stacking
5. RS232 connection/level converter connecting to the serial I/O ports to allow easy RS232 comms
6. Other ideas welcome

Kinda like a stripped down version of PiLeven with more proto-space.


Cheers,

Harry E.

Re: Raspberry Pi Board Suggestions

Posted: Sun May 24, 2015 11:01 pm
by angusgr
Hi Harry,

Thanks for the suggestion. Some good ideas there!


Angus

Re: Raspberry Pi Board Suggestions

Posted: Mon Nov 09, 2015 11:50 pm
by ChrisL
Any chance you might consider a Raspbery Pi PoE (802.3af) expansion board?

I'm considering building something based around your Arduino ethernet regulator:

http://www.freetronics.com.au/collectio ... tor-8023af

Shame it puts out 7.5v, otherwise it might be perfect! ;)

Thanks,
Chris.

Re: Raspberry Pi Board Suggestions

Posted: Tue Nov 10, 2015 10:43 pm
by angusgr
Hi Chris,

We've discussed the idea a little internally, but we don't have any current plans sorry. Thanks for bringing it up though!

Angus

Re: Raspberry Pi Board Suggestions

Posted: Fri Sep 09, 2016 7:08 am
by willieaames
I've used the GPIO expander before, pretty useful on projects that use a lot of pins. You could get the cable, hack it up, and make your own custom arduino expander.

Re: Raspberry Pi Board Suggestions

Posted: Sun Jan 06, 2019 5:28 am
by dusthead
Us folks in the home automation community using Raspberry Pi to run Home Assistant have an interest in a shield to give direct support for mSATA SSD sticks. We’re experiencing SD card failures because Home Assistant writes and reads a lot at the same time, also uses a database file, etc so many people have moved to NAS servers or other more reliable storage methods. Some who are more stubborn wishing to keep the Pi, like me, have looked at mSATA SSD as a solution but the only option available right now is a USB bridged expansion board. So, while reliability is much higher and failure rate brought way down, speed was sacrificed. If there was a way to directly connect the Pi with an mSATA SSD shield we could get full speed read/write.

Current solution: https://www.instructables.com/id/Raspbe ... SSD-Drive/