Iron man arc reactor build

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
dualbios
Posts:2
Joined:Mon Jun 11, 2012 12:02 am
Iron man arc reactor build

Post by dualbios » Mon Jun 11, 2012 12:58 am

hi guys, just bought my self a leo and etherten. have got a 12v sla battery. made my self a voltage regulator. I have purchased 3 ndrive mosfets and a buzzer module.

Now the plan
the arc will have 2 smd ring leds and a 10w led in the middle with a driver.
use the ndriver modules to dim and control the led.s

the buzzer will sound slowly increasing hz when a button is pressed and the 10w led will slowly fade in over 1/2sec and then burst to full power for 1/2second

another button will be used to start the reactor which will make a low buzzing noise with the buzzer and fade in each ring with a 10% burst from the 10w led as it stables.

now im new to the coding im slowly working that out. im confused when it comes to switching the ndrivers how should i wire them up

hads
Posts:10
Joined:Tue May 01, 2012 3:58 am

Re: Iron man arc reactor build

Post by hads » Mon Jun 11, 2012 1:58 am


dualbios
Posts:2
Joined:Mon Jun 11, 2012 12:02 am

Re: Iron man arc reactor build

Post by dualbios » Mon Jun 11, 2012 4:40 am

thanks mate that video has helped me with the ndriver. so how does the pwm go with switching how do u make it dim in the code?

Post Reply