INTERNAL LEDS - FAILING USB CONNECTION

The EtherTen combines an Uno-equivalent Arduino-compatible board and Wiznet-based Ethernet support, along with a microSD card slot and Power-over-Ethernet support. [Product page]
Post Reply
cescoferraro
Posts: 20
Joined: Wed Jul 16, 2014 12:51 am

INTERNAL LEDS - FAILING USB CONNECTION

Post by cescoferraro » Sat Aug 02, 2014 9:45 pm

TX -
RS -
COL -
FDX -
100 -
LNK -

What does each one mean? I ask that cause my etherten has the COL light on, all the time. I did not used to. Now the usb connection works randomly. And it is overheating, specially the ethernet chip.

andrew
Freetronics Staff
Freetronics Staff
Posts: 978
Joined: Sun Jul 14, 2013 7:06 am
Location: Melbourne, Australia
Contact:

Re: INTERNAL LEDS - FAILING USB CONNECTION

Post by andrew » Sun Aug 03, 2014 9:53 pm

Are you running your EtherTen from external power when using Ethernet?

Post Reply