Compiling Error - Labview

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
Posts: 1
Joined: Thu Oct 16, 2014 11:32 am

Compiling Error - Labview

Post by danytphilip » Thu Oct 16, 2014 11:39 am

Hi all,

I am trying to load the Labview Interface for Arduino firmware into the Eleven.
I follow instructions as per the following link.

Point 6 directs me to ... enDocument

I follow instructions here and am trying to upload the firmware but i get the following compiling error.

C:\Program Files (x86)\Arduino\libraries\RobotIRremote\IRremoteTools.cpp:5: error: 'TKD2' was not declared in this scope

Any advise on what could be done?

Kind regards

Freetronics Staff
Freetronics Staff
Posts: 978
Joined: Sun Jul 14, 2013 7:06 am
Location: Melbourne, Australia

Re: Compiling Error - Labview

Post by andrew » Thu Oct 16, 2014 10:12 pm

Looks like there is a mismatch in a reference betweem the sketch (code) you're trying to compile and "robotIRremote" Arduino library. Best to contact who provided you the sketch.

Post Reply