temporary disable of reset

The "Eleven" is our Uno-equivalent Arduino-compatible board, but with a number of improvements including prototyping area, a mini-USB connector, LEDs mounted near the edge, and the D13 LED isolated using a FET. [Product page]
Post Reply
m3ch
Posts: 1
Joined: Fri Aug 23, 2013 5:41 am

temporary disable of reset

Post by m3ch » Fri Aug 23, 2013 5:45 am

Small correction to note on this page of the website.

http://www.freetronics.com/pages/using- ... rogrammers

"A temporary way to disable auto-reset is to place a 10 uF capacitor between the 5V and RST pins"

Should read..

"A temporary way to disable auto-reset is to place a 10 uF capacitor between the GND and RST pins"

angusgr
Freetronics Staff
Freetronics Staff
Posts: 853
Joined: Tue Apr 09, 2013 11:19 pm
Location: Melbourne, Australia
Contact:

Re: temporary disable of reset

Post by angusgr » Fri Aug 23, 2013 7:12 am

Oops, of course! Good catch, thank you. Now fixed.

Post Reply