RGB - SPI conflict?

A shrunk down Leonardo-compatible board, thumb drive sized with native USB support. [Product info]
Post Reply
Bobalong
Posts:3
Joined:Tue Aug 14, 2012 6:27 am
RGB - SPI conflict?

Post by Bobalong » Tue Aug 14, 2012 6:57 am

I'm trying to use a DS3234 RTC module with Leostick.
It works when I connect it to a Duemilanove but not with what appears to be the same wiring with the Leostick.

Is the RGB's use of D13 interfering with the CLK signal?
Is there a special Leostick SPI library?

Thanks
Jim

Bobalong
Posts:3
Joined:Tue Aug 14, 2012 6:27 am

Re: RGB - SPI conflict?

Post by Bobalong » Tue Aug 14, 2012 11:16 am

I found the problem - SPI has been moved from D11-D13 to the ICSP connector.

Post Reply