CNC SHIELD

Got comments, questions, or tips about any of the shields listed on ShieldList.org? Post them here!
Post Reply
cjgaus
Posts: 8
Joined: Mon Feb 04, 2013 10:20 pm

CNC SHIELD

Post by cjgaus » Mon Feb 04, 2013 10:25 pm

Hi Guys.

Was just reading up on your new cnc shield. I am currently in the process of building a shapeoko cnc which has 3 stepper motors (1 for each axis). My question is will you guys be releasing a board which can control 3 stepper motors?

cef
Freetronics Staff
Freetronics Staff
Posts: 106
Joined: Wed Nov 09, 2011 12:53 am

Re: CNC SHIELD

Post by cef » Sun Mar 31, 2013 7:54 am

Sorry for the late reply.

The original board (which was developed as part of the HackCNC project for the LCA mini-conf) has 2 stepper drivers on board, and output ready for connecting a third stepper driver, such as a Pololu A4988 or Pololu DRV8825. Therefore the board will control 3 stepper motors, but you need to supply the 3rd stepper driver board.

FWIW: I actually am involved a lot with 3D Printing, so I'm interested in a board that drives more than 3 stepper motors and has a few "switched" outputs for controlling other things (eg: spindle motor on a CNC mill, or a hot end on a 3D printer). Will discuss with Jon and Marc and see what comes of it! ;)

Post Reply